1. General TIONES TM 6041A is a white fine powder consisting mainly of pure acrylate copolymer resin. 2. properties Main component: Pure acrylate copolymer Properties of emulsion (Solid content 50%): Viscosity at 25℃ <2,000 cps (Brookfield LVT spindle 3, 12 rpm) pH value 7.0 ~ 8.0 Properties of powder: Appearance white powder Volatile matters 2% or below MFFT 0~5℃ Glass transition temperature (Tg) 　0°C Bulk density approx. 0.5g/ml Average particle size　　　　　　　approx. 100 μm 3. Application TIONES TM 6041A is a water redispersible powder which can be used universally to manufacture polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. 4. Package 20 kg: valved multi-layer paper sacks with polyethylene interleaf 5. Storage TIONES TM 6041A must be stored in a cool, dry place. To prevent moisture penetration, packs which have been opened should be sealed again as soon as possible. On account of thermoplastic behavior of the redispersible powder, sacks must not be stacked higher than one pallet. TIONES TM 6041A storage times should not exceed 6 months from date of delivery. 6. Industrial Safety and Environmental Protection  Risk of explosion by static sparks or ignition sources.  Use only explosion-proof equipment.  Use with local exhaust ventilation.  Wear protective eyeglasses or chemical safety goggles. 7. A safety data sheet will be made available on request. This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.